| |
Individual Steel Gauge Block
สตีลเกจบล็อก แบบชิ้นเดี่ยว
|
Steel is the traditional material for gauge blocks. Gauges made from steel can provide many years of useful life if used and looked after carefully.
They must me cleaned carefully after use, stored in a dry environment and be protected against corrosion
UKAS calibrated certificate
|
| |
Individual Ceramic Gauge Block
เซรามิคเกจบล็อก แบบชิ้นเดี่ยว
|
Opus ceramic gauge blocks (Zirco-Blocks) are manufactured from an exceptionally pure grade of zirconia ceramic.
The commonly held belief that all ceramic materials are brittle and prone to catastrophic failure can now be dispelled
with the remarkable zirconia ceramic material which used to manufacture Opus Zirco-Blocks blocks
UKAS calibrated certificate |
| |
Opus Long Series Gauge Blocks
สตีลเกจบล็อก แบบชิ้นเดี่ยว ขนาดยาว
|
Opus long series steel gauge blocks are carefully manufactured to ISO:3650:1998
Standard gauge block cross-section of 35 x 9mm and are manufactured from 125mm up to 1 metre in length.
UKAS calibrated certificate |
| |
Opus Toggle Clamps
ตัวต่อเกจบล็อก ขนาดยาว
|
Opus toggle clamps are specially designed for ease of use with long series gauge blocks. Two pins locate on the gauge block holes, a firm sideways pressure on the clamp will snap the clamp into the closed position bringing the gauging faces together and locking them into position
UKAS calibrated certificate
|
| |
Opus Ceramic Tipped Gauge Blocks
สตีลเกจบล็อก แบบปลายเซรามิค
|
Opus Ceramic Tipped Gauge Blocks are manufactured to the tolerances of EN ISO:3650:1998.
The body of the gauge block is made from high quality stabilised steel,
the tips are made from an exceptionally pure grade of Zirconia ceramic material
UKAS calibrated certificate
|
| |
Tungsten Carbide Gauge Blocks
ทังสเตนเกจบล็อก
|
Opus Tungsten Carbide Gauge Bocks are extremely accurate,
stable and have excellent wringing characteristics
Each gauge is manufactured from carefully selected materials having a hardness of approximately 1500 Hv,
they set standards of surface finish that are beyond materials such as steel
UKAS calibrated certificate |
| |
Angle Gauges
เกจบล็อก(มุม)
|
Opus Angle Gauges are available as thin series gauges 50mm x 9mm
or to NPL Specification MOY/SCMI/18 combination angle gauges
UKAS calibrated certificate |
| |
Precision Balls
ลูกบอลมาตรฐาน
|
Calibrated Precision Balls are used in a wide range of applications including in the measurement of small internal tapers, internal annular grooves and throated worm wheels
UKAS calibrated certificate |
|
|
|
