Pipe Impact Tester NOVOTEST STRIKE U1-4219

Impact tester is intended for testing the strength of coatings upon impact on pipelines during their installation and operation. Device allows testing directly on the pipeline and does not require the manufacture of samples

The device is mounted on three adjustable feet-screws, so STRIKE-U4219 can be installed on a flat surface (in the case of testing samples), and directly on a pipe of any diameter.

The impact test device is made of structural steel and coated with powder paint, which guarantees its durability and adaptability to operation in difficult field conditions.

Impact Tester NOVOTEST STRIKE U1-4219 is intended for testing the strength of coatings upon impact on pipelines during their installation and operation. NOVOTEST STRIKE U1-4219 allows testing directly on the pipeline and does not require the manufacture of samples.

According the standard, it is recommended to test the strength of coatings upon impact together with checking the continuity of the coating after impact using the Pulse Holiday Detector NOVOTEST SPARK-1.

Compliance with standards	DSTU 4219, GOST 51164
Weight	10 kg
Instrument scale length	500 mm
Graduation	10 mm
Ball diameter	16 mm

Instrument
Operating manual
Package

Operating method

The tests can be performed in two ways:

By principle destroyed / not destroyed, when the test is performed at set up height and a certain weight of sinker (test coating for compliance with the specific requirements)
Test for define the minimum drop height with a gradual increasing the height of the falling and the minimum weight of sinker at which the coating was cracked or exfoliated from the painted surface

Testing

Install the required sinker at the desired height. If necessary, use required restrictors to limit the depth of the indentation. Put the tested plate outside (direct hit) or inside (back side hit) on the anvil cover. Holding the tested plate at this position by a presser coupling. Release the sinker and allows it to fall on the tested plate, which is lying on the anvil. After that inspect the coating with the magnifying glass.

สอบถามเพิ่มเติม

Tonan Asia Autotech Co., Ltd.

Line: @tonanasia

Tel: 0-2565-9370-4

E-mail: sales@tonanasia.com

Website: https://www.tonanasia.com

Google Map: https://goo.gl/maps/SM3p4YGQ6qC2